| FAQ for Lightspeed |
 |
- Which devices does Lightspeed currently support?
The current version of Lightspeed supports the following devices:
Palm:
Tungsten T3
Tungsten C
Tungsten E
Tungsten T5
Tungsten E2
TX
LifeDrive
Zire 21
Zire 71
Zire 72
Zire 31
Zire 22
Treo 650 GSM
Treo 650 CDMA
Treo 680
Treo 700P
Treo 755P
Centro
Sony Clié:
NX60
NX70V
NX73V
NX80V
NZ90
TG50
TJ25
TJ35
TJ27
TJ37
Tapwave:
Zodiac 1
Zodiac 2
Garmin:
iQue 3600
iQue 3200
iQue 3200a
Samsung:
SGH-i530
SPH-i550
Qool Labs:
Qool QDA-700
|
- What is the CPU clock frequency?
The CPU clock frequency is the highest theorethically possible number of instructions the CPU can execute per second.
The CPU clock on the supported Sony CLIE devices is set to 200 Mhz by the manufacturer, and the Palm Tungsten C and Tungsten T3 is set to 400 Mhz.
With Lightspeed you can change the CPU clock to as high as 600 Mhz and as low as 33 Mhz.
|
- What is the system bus and the Bus clock?
The system bus is the data highway where data travels to/from the different parts on the device. From RAM to Screen, from RAM to the CPU core etcetera.
The Bus clock frequency is the rate that data travels on the system bus. A low Bus clock is a huge bottleneck on overall performance.
The Bus clock on the supported Sony CLIE devices is set to 50 Mhz, by the manufacturer.
With Lightspeed you can change the bus clock to as high as 150 Mhz - an increase of 200 %.
The Bus clock on the Tungsten C and Tungsten T3 is normally set to 100 Mhz. With Lightspeed you can set it as high as 265 Mhz, and as low as 16 Mhz.
|
